• 开机自启动 Seafile
    • 对于运行 systemd 的系统
      • 创建 systemd 服务文件 /etc/systemd/system/seafile.service
      • 创建 systemd 服务文件 /etc/systemd/system/seahub.service
      • 创建 systemd 服务文件 /etc/systemd/system/seafile-client.service (可选)
      • 设置服务开机自启动
    • 对于使用 init 而非 systemd 的系统
    • Ubuntu 14.10 以及更旧的版本
      • 创建一个脚本 /etc/init.d/seafile-server
      • 确保 seafile-server 脚本可执行
      • 添加 seafile-server 到 rc.d 中
    • 其他基于 Debian 的发行版
      • 创建一个脚本 /etc/init.d/seafile-server
      • 为日志添文件加目录
      • 确保 seafile-server 脚本可执行
      • 添加 seafile-server 到 rc.d
      • 完成
    • RHEL/CentOS
  • Change the value of "user" to your linux user name
  • Change the value of "seafile_dir" to your path of seafile installation
  • usually the home directory of $user
    • RHEL/CentOS (run as service)
      • 创建文件 /etc/sysconfig/seafile
      • 创建一个脚本 /etc/init.d/seafile
      • 创建脚本 /etc/init.d/seahub

    开机自启动 Seafile

    对于运行 systemd 的系统

    • 例如 Debian 8 以及更新的版本,Ubuntu 15.04以及更新的版本。
      创建 systemd 服务管理文件,将以下示例中 ${seafile_dir} 替换为您自己的 seaile 安装路径,并且将 user 指向真正运行seafile的用户。然后您需要重新加载 systemd 的守护进程:systemctl daemon-reload

    创建 systemd 服务文件 /etc/systemd/system/seafile.service

    1. sudo vim /etc/systemd/system/seafile.service

    文件内容如下:

    1. [Unit]
    2. Description=Seafile
    3. # add mysql.service or postgresql.service depending on your database to the line below
    4. After=network.target
    5. [Service]
    6. Type=oneshot
    7. ExecStart=${seafile_dir}/seafile-server-latest/seafile.sh start
    8. ExecStop=${seafile_dir}/seafile-server-latest/seafile.sh stop
    9. RemainAfterExit=yes
    10. User=seafile
    11. Group=seafile
    12. [Install]
    13. WantedBy=multi-user.target

    创建 systemd 服务文件 /etc/systemd/system/seahub.service

    1. sudo vim /etc/systemd/system/seahub.service

    文件内容如下(如果你想要运行fastcgi模式,请不要忘记修改它。)

    1. [Unit]
    2. Description=Seafile hub
    3. After=network.target seafile.service
    4. [Service]
    5. # change start to start-fastcgi if you want to run fastcgi
    6. ExecStart=${seafile_dir}/seafile-server-latest/seahub.sh start
    7. ExecStop=${seafile_dir}/seafile-server-latest/seahub.sh stop
    8. User=seafile
    9. Group=seafile
    10. Type=oneshot
    11. RemainAfterExit=yes
    12. [Install]
    13. WantedBy=multi-user.target

    创建 systemd 服务文件 /etc/systemd/system/seafile-client.service (可选)

    只有在你有了 seafile 控制台客户端并且希望开机运行此程序时你才需要创建此文件。

    1. sudo vim /etc/systemd/system/seafile-client.service

    文件内容如下:

    1. [Unit]
    2. Description=Seafile client
    3. # Uncomment the next line you are running seafile client on the same computer as server
    4. # After=seafile.service
    5. # Or the next one in other case
    6. # After=network.target
    7. [Service]
    8. Type=oneshot
    9. ExecStart=/usr/bin/seaf-cli start
    10. ExecStop=/usr/bin/seaf-cli stop
    11. RemainAfterExit=yes
    12. User=seafile
    13. Group=seafile
    14. [Install]
    15. WantedBy=multi-user.target

    设置服务开机自启动

    1. sudo systemctl enable seafile.service
    2. sudo systemctl enable seahub.service
    3. sudo systemctl enable seafile-client.service # 可选

    对于使用 init 而非 systemd 的系统

    Ubuntu 14.10 以及更旧的版本

    在没有 systemd 的 Ubuntu 系统上,我们使用 /etc/init.d/ 脚本来设置 seafile/seahub 开机自启动。

    创建一个脚本 /etc/init.d/seafile-server

    1. sudo vim /etc/init.d/seafile-server

    脚本内容如下:(你需要根据实际情况修改 userseafile_dir 的值)

    1. #!/bin/bash
    2. ### BEGIN INIT INFO
    3. # Provides: seafile-server
    4. # Required-Start: $remote_fs $syslog
    5. # Required-Stop: $remote_fs $syslog
    6. # Default-Start: 2 3 4 5
    7. # Default-Stop: 0 1 6
    8. # Short-Description: Seafile server
    9. # Description: Start Seafile server
    10. ### END INIT INFO
    11. # Change the value of "user" to your linux user name
    12. user=haiwen
    13. # Change the value of "seafile_dir" to your path of seafile installation
    14. # usually the home directory of $user
    15. seafile_dir=/data/haiwen
    16. script_path=${seafile_dir}/seafile-server-latest
    17. seafile_init_log=${seafile_dir}/logs/seafile.init.log
    18. seahub_init_log=${seafile_dir}/logs/seahub.init.log
    19. # Change the value of fastcgi to true if fastcgi is to be used
    20. fastcgi=false
    21. # Set the port of fastcgi, default is 8000. Change it if you need different.
    22. fastcgi_port=8000
    23. #
    24. # Write a polite log message with date and time
    25. #
    26. echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
    27. echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
    28. case "$1" in
    29. start)
    30. sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    31. if [ $fastcgi = true ];
    32. then
    33. sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    34. else
    35. sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    36. fi
    37. ;;
    38. restart)
    39. sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    40. if [ $fastcgi = true ];
    41. then
    42. sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    43. else
    44. sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    45. fi
    46. ;;
    47. stop)
    48. sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    49. sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    50. ;;
    51. *)
    52. echo "Usage: /etc/init.d/seafile-server {start|stop|restart}"
    53. exit 1
    54. ;;
    55. esac

    注意: 如果你正在使用本地 mysql 服务,请将 # Required-Start: $remote_fs $syslog 替换为 # Required-Start: $remote_fs $syslog mysql.

    确保 seafile-server 脚本可执行

    1. sudo chmod +x /etc/init.d/seafile-server

    添加 seafile-server 到 rc.d 中

    1. sudo update-rc.d seafile-server defaults

    注意: 如果你更新了你的 seafile 服务,不要忘记更新 script_path 的值。

    其他基于 Debian 的发行版

    创建一个脚本 /etc/init.d/seafile-server

    1. sudo vim /etc/init.d/seafile-server

    脚本内容如下:(你需要根据实际情况修改 userseafile_dir 的值)

    1. #!/bin/sh
    2. ### BEGIN INIT INFO
    3. # Provides: seafile-server
    4. # Required-Start: $local_fs $remote_fs $network
    5. # Required-Stop: $local_fs
    6. # Default-Start: 2 3 4 5
    7. # Default-Stop: 0 1 6
    8. # Short-Description: Starts Seafile Server
    9. # Description: starts Seafile Server
    10. ### END INIT INFO
    11. # Change the value of "user" to linux user name who runs seafile
    12. user=haiwen
    13. # Change the value of "seafile_dir" to your path of seafile installation
    14. # usually the home directory of $user
    15. seafile_dir=/data/haiwen
    16. script_path=${seafile_dir}/seafile-server-latest
    17. seafile_init_log=${seafile_dir}/logs/seafile.init.log
    18. seahub_init_log=${seafile_dir}/logs/seahub.init.log
    19. # Change the value of fastcgi to true if fastcgi is to be used
    20. fastcgi=false
    21. # Set the port of fastcgi, default is 8000. Change it if you need different.
    22. fastcgi_port=8000
    23. #
    24. # Write a polite log message with date and time
    25. #
    26. echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
    27. echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
    28. case "$1" in
    29. start)
    30. sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    31. if [ $fastcgi = true ];
    32. then
    33. sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    34. else
    35. sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    36. fi
    37. ;;
    38. restart)
    39. sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    40. if [ $fastcgi = true ];
    41. then
    42. sudo -u ${user} ${script_path}/seahub.sh ${1}-fastcgi ${fastcgi_port} >> ${seahub_init_log}
    43. else
    44. sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    45. fi
    46. ;;
    47. stop)
    48. sudo -u ${user} ${script_path}/seahub.sh ${1} >> ${seahub_init_log}
    49. sudo -u ${user} ${script_path}/seafile.sh ${1} >> ${seafile_init_log}
    50. ;;
    51. *)
    52. echo "Usage: /etc/init.d/seafile-server {start|stop|restart}"
    53. exit 1
    54. ;;
    55. esac

    注意:

    • 如果你想要以 fastcgi 模式运行 seahub ,只需要将 fastcgi 的值配置为 true

    • 如果你是在 MySQL 下部署 Seafile,添加 "mysql" 到 Required-Start 那行:

    1. <!-- -->
    2. # Required-Start: $local_fs $remote_fs $network mysql

    为日志添文件加目录

    1. mkdir /path/to/seafile/dir/logs

    确保 seafile-server 脚本可执行

    1. sudo chmod +x /etc/init.d/seafile-server

    添加 seafile-server 到 rc.d

    1. sudo updata-rc.d seafile-server defaults

    完成

    如果你更新了你的 seafile 服务,不要忘记更新 script_path 的值。

    RHEL/CentOS

    在 RHEL/CentOS 上,脚本 /etc/re.local 会在系统启动时被执行,所以可以通过这个脚本来实现 seafile/seahub 开机自启。

    • 确定您的 python 版本 (python 2.6 或者 2.7)

      1. which python2.6 # 或者 "which python2.7"
    • 在 /etc/rc.local 中添加 python2.6(2.7) 的目录到 PATH,并且添加 seafile/seahub 的启动命令

      1. # Assume the python 2.6(2.7) executable is in "/usr/local/bin"
        PATH=$PATH:/usr/local/bin/

    Change the value of "user" to your linux user name

    user=haiwen

    Change the value of "seafile_dir" to your path of seafile installation

    usually the home directory of $user

    seafile_dir=/data/haiwen
    script_path=${seafile_dir}/seafile-server-latest

    sudo -u ${user} ${script_path}/seafile.sh start > /tmp/seafile.init.log 2>&1
    sudo -u ${user} ${script_path}/seahub.sh start > /tmp/seahub.init.log 2>&1

    注意: 如果你想要以 fastcgi 模式启动,只需要将最后一行的 "seahub.sh start" 改为 "seahub.sh start-fastcgi"

    • 完成。如果你更新了你的 seafile 服务,不要忘记更新 script_path 的值。

      RHEL/CentOS (run as service)

    在 RHEL/CentOS 我们使用 /etc/init.d/ 脚本来实现 seafile/seahub 服务开机自启动。

    创建文件 /etc/sysconfig/seafile

    1. # Change the value of "user" to your linux user name
    2. user=haiwen
    3. # Change the value of "seafile_dir" to your path of seafile installation
    4. # usually the home directory of $user
    5. seafile_dir=/data/haiwen
    6. script_path=${seafile_dir}/seafile-server-latest
    7. seafile_init_log=${seafile_dir}/logs/seafile.init.log
    8. seahub_init_log=${seafile_dir}/logs/seahub.init.log
    9. # Change the value of fastcgi to true if fastcgi is to be used
    10. fastcgi=false
    11. # Set the port of fastcgi, default is 8000. Change it if you need different.
    12. fastcgi_port=8000

    创建一个脚本 /etc/init.d/seafile

    1. #!/bin/bash
    2. #
    3. # seafile
    4. #
    5. # chkconfig: - 68 32
    6. # description: seafile
    7. # Source function library.
    8. . /etc/init.d/functions
    9. # Source networking configuration.
    10. . /etc/sysconfig/network
    11. if [ -f /etc/sysconfig/seafile ];then
    12. . /etc/sysconfig/seafile
    13. else
    14. echo "Config file /etc/sysconfig/seafile not found! Bye."
    15. exit 200
    16. fi
    17. RETVAL=0
    18. start() {
    19. # Start daemons.
    20. echo -n $"Starting seafile: "
    21. ulimit -n 30000
    22. su - ${user} -c"${script_path}/seafile.sh start >> ${seafile_init_log} 2>&1"
    23. RETVAL=$?
    24. echo
    25. [ $RETVAL -eq 0 ] && touch /var/lock/subsys/seafile
    26. return $RETVAL
    27. }
    28. stop() {
    29. echo -n $"Shutting down seafile: "
    30. su - ${user} -c"${script_path}/seafile.sh stop >> ${seafile_init_log} 2>&1"
    31. RETVAL=$?
    32. echo
    33. [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seafile
    34. return $RETVAL
    35. }
    36. #
    37. # Write a polite log message with date and time
    38. #
    39. echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
    40. # See how we were called.
    41. case "$1" in
    42. start)
    43. start
    44. ;;
    45. stop)
    46. stop
    47. ;;
    48. restart|reload)
    49. stop
    50. start
    51. RETVAL=$?
    52. ;;
    53. *)
    54. echo $"Usage: $0 {start|stop|restart}"
    55. RETVAL=3
    56. esac
    57. exit $RETVAL

    创建脚本 /etc/init.d/seahub

    1. #!/bin/bash
    2. #
    3. # seahub
    4. #
    5. # chkconfig: - 69 31
    6. # description: seahub
    7. # Source function library.
    8. . /etc/init.d/functions
    9. # Source networking configuration.
    10. . /etc/sysconfig/network
    11. if [ -f /etc/sysconfig/seafile ];then
    12. . /etc/sysconfig/seafile
    13. else
    14. echo "Config file /etc/sysconfig/seafile not found! Bye."
    15. exit 200
    16. fi
    17. RETVAL=0
    18. start() {
    19. # Start daemons.
    20. echo -n $"Starting seahub: "
    21. ulimit -n 30000
    22. if [ $fastcgi = true ];
    23. then
    24. su - ${user} -c"${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log} 2>&1"
    25. else
    26. su - ${user} -c"${script_path}/seahub.sh start >> ${seahub_init_log} 2>&1"
    27. fi
    28. RETVAL=$?
    29. echo
    30. [ $RETVAL -eq 0 ] && touch /var/lock/subsys/seahub
    31. return $RETVAL
    32. }
    33. stop() {
    34. echo -n $"Shutting down seahub: "
    35. su - ${user} -c"${script_path}/seahub.sh stop >> ${seahub_init_log} 2>&1"
    36. RETVAL=$?
    37. echo
    38. [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seahub
    39. return $RETVAL
    40. }
    41. #
    42. # Write a polite log message with date and time
    43. #
    44. echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
    45. # See how we were called.
    46. case "$1" in
    47. start)
    48. start
    49. ;;
    50. stop)
    51. stop
    52. ;;
    53. restart|reload)
    54. stop
    55. start
    56. RETVAL=$?
    57. ;;
    58. *)
    59. echo $"Usage: $0 {start|stop|restart}"
    60. RETVAL=3
    61. esac
    62. exit $RETVAL

    然后设置开机自启:

    1. chmod 550 /etc/init.d/seafile
    2. chmod 550 /etc/init.d/seahub
    3. chkconfig --add seafile
    4. chkconfig --add seahub
    5. chkconfig seahub on
    6. chkconfig seafile on

    并且运行:

    1. service seafile start
    2. service seahub start

    原文: https://manual-cn.seafile.com/deploy/start_seafile_at_system_bootup.html